1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dizzy wiring

Discussion in 'HYBRID -> EG-EK / DC' started by whiteciv88, Aug 10, 2008.

  1. whiteciv88

    whiteciv88 New Member

    Messages:
    68
    Likes Received:
    0
    Joined:
    Aug 20, 2007
    Ok after doing my first motor swap in my 2000 ex that i put a b18b in i have a few questions. Got the wiring done but the engine that i bought had a 9 pin connector(jdm motor) and the civic one had 8 pin connector. So my question being is what is the blue wire for?
    on the integra dizzy. Please get back to me and my speedometer dosnt work any answers for that
     
  2. whiteciv88

    whiteciv88 New Member

    Messages:
    68
    Likes Received:
    0
    Joined:
    Aug 20, 2007
    can anyone help me out?
     
  3. whiterabbit06

    whiterabbit06 Why oh why didn't I take the blue pill? VIP

    Messages:
    1,472
    Likes Received:
    312
    Joined:
    Oct 27, 2007
    Location:
    Crestview, Fl
    The blue wire should be for your tachometer.
     
  4. whiteciv88

    whiteciv88 New Member

    Messages:
    68
    Likes Received:
    0
    Joined:
    Aug 20, 2007
    my speedometer dosnt work either sorry to not mention that in the first post get back to me with details
     
  5. whiteciv88

    whiteciv88 New Member

    Messages:
    68
    Likes Received:
    0
    Joined:
    Aug 20, 2007
    ok after doing my first swap i had idleing problems. i found out that it was a vacuum leak it was the new throttle body gasket that i bought from honda. i made a new one and it runs fine now. my next question is what my speedometer doesnt work. i have it plugged in and the fuses are not blown could anybody help me out? please get back to me soon
     
Verification:
Draft saved Draft deleted

Share This Page