1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dohcvtec_accord

Discussion in 'HYBRID -> BA-BB /CA-CD' started by 91EXH23, Sep 3, 2003.

  1. 91EXH23

    91EXH23 Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Aug 24, 2003
    Ok you had a 94-96 accord that was a EX And i am about to buy the same and was wanting to do a h22 swap is it just pulling and droping the new one in what PS parts did you use A/C and all that good stuff thanks
     
  2. driver1

    driver1 Senior Member

    Messages:
    1,979
    Likes Received:
    0
    Joined:
    Jan 15, 2003
    i used my h22 ps pump and bracket and accord ac compressor with prelude bracket and i also did not disconnect the compressor in the swap i just unbolted it and tied it off out of the way this whay u dont have to recharge ur shit man ;)
     
  3. 91EXH23

    91EXH23 Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Aug 24, 2003
    Ok what about drive shafts I guess accord it goin to be a 5 speed
     
  4. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    driver1 had some good advice.

    Use your Accord CV axles with the Prelude halfshaft.
     
  5. 91EXH23

    91EXH23 Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Aug 24, 2003
    ECU stay the same plug and play Any wires to run
     
  6. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Dude, go check out http://www.h22a.org and click on the 5th Gen link, I think all your questions will be answered.
     
Verification:
Draft saved Draft deleted

Share This Page