1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Doing a 1st gen LS swap into crx

Discussion in 'ECU's, Electronics, and Tuning' started by RFHOMI2U, Aug 7, 2003.

  1. RFHOMI2U

    RFHOMI2U Senior Member

    Messages:
    301
    Likes Received:
    0
    Joined:
    Nov 28, 2002
    I have a 1st gen LS motor I will be putting into my CRX. Will the ECU for this motor plug right in? They are both OBD0 right? I won't have to alter my wiring harness?
     
  2. HondaMoCo

    HondaMoCo Senior Member

    Messages:
    322
    Likes Received:
    0
    Joined:
    Jan 8, 2003
    Location:
    lancaster/palmdale So Cal
    if you have an si or hf then the 90-91 ls ecu will plug right in, if you have a std then you will need ot perform an MPFI conversion
     
  3. honda1.8ac

    honda1.8ac Member

    Messages:
    40
    Likes Received:
    0
    Joined:
    Jun 20, 2003
    how do u go about doing that, and adding the wires for the piston sensor
     
  4. honda1.8ac

    honda1.8ac Member

    Messages:
    40
    Likes Received:
    0
    Joined:
    Jun 20, 2003
    what pins do u need to use and the wires going to them and all that good stuff. it would help me out alot
    thanks
     
Verification:
Draft saved Draft deleted

Share This Page