1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Doing A Ls/vtec Conversion ?

Discussion in 'Engine Building' started by mrimport2003, Jun 20, 2003.

  1. mrimport2003

    mrimport2003 Junior Member

    Messages:
    21
    Likes Received:
    0
    Joined:
    May 29, 2003
    Hey guys I have a LS Block which is an OBD1 Engine that I have, I want to put a VTEC head from a B16 OBD0 Engine on the LS Head, what difficulites will I run into, I understand the installation, (i.e. running oil lines, vtec lines, etc) But what else will I have to change, someone told me alternator, distributor, injectors since the head is OBD0 and the Block is OBD1, any input I would greatly appreciate
     
  2. lsvtec

    lsvtec GNU/Linux Evangelist

    Messages:
    5,453
    Likes Received:
    4
    Joined:
    Sep 30, 2002
    Location:
    Greater Portland, OR
    If your alternator came with the block and it is going into an OBD1 car you can keep it. You will need to get a VTEC distributor from an OBD1 B series and some OBD1 B series injectors.
     
  3. mrimport2003

    mrimport2003 Junior Member

    Messages:
    21
    Likes Received:
    0
    Joined:
    May 29, 2003
    Besides injectors and distributor will that be it ???/ thanks for the help
     
  4. D See 2

    D See 2 Senior Member

    Messages:
    2,405
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Baltimore, MD
Verification:
Draft saved Draft deleted

Share This Page