1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

dumfounded

Discussion in 'ECU's, Electronics, and Tuning' started by little90, Nov 2, 2009.

  1. little90

    little90 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jun 21, 2009
    Location:
    Snohomish WASH
    ok my pr4 ecu popping up a oxygen content cod so i replaced the o2 sensore and the code still exist plus code 6 ive replaced both of the problems and cleard the ecu but still get the same codes help
     
  2. phyregod

    phyregod !!YTINASNI

    Messages:
    9,449
    Likes Received:
    225
    Joined:
    Jun 11, 2005
    Location:
    Central Texas
    1 blink is oxygen.

    6 blinks is the water temperature sensor.

    1 long and 6 short is code 16, which is "Fuel Injectors"

    Is the car running? Is it in limp mode? Normal rev range or limited somewhere around 3k?
     
  3. little90

    little90 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jun 21, 2009
    Location:
    Snohomish WASH
    yes that is what its doing how can i fix it do ineed new injectors thank you
     
  4. little90

    little90 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jun 21, 2009
    Location:
    Snohomish WASH
    the car is running but rough and yes it limited on revs and its one soild and 6 blinks its almost like it missing i put difrent enjectors still doing the same thing will a pm6 ecu work better than a pr4
     
  5. little90

    little90 New Member

    Messages:
    28
    Likes Received:
    0
    Joined:
    Jun 21, 2009
    Location:
    Snohomish WASH
    hey i put the pm6 ecu in and it runs better but its still putting up code 16 what can i do to fix this
     
Verification:
Draft saved Draft deleted

Share This Page