1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ECU and Installation MADNESS

Discussion in 'ECU's, Electronics, and Tuning' started by Meolili, Jul 22, 2004.

  1. Meolili

    Meolili Junior Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Jul 22, 2004
    I'm having so many issues I don't know were to start. I have a 92 honda civic 4 door with a stock engine and a auto tranny . I just bought a D16A with no ECU on it. I don't know which ECU is suitable for it. Not to mention having issues finding someone to install it. I'm in SoCal. I'm a novice to this whole JDM swap thing and any help is much appreciated.
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    you're up shits creek because you didn't read our non-recommended swap choices.
    it can be done... but not by someone who really doesn't know what they are doing.

    you need to do a hydro -> cable conversion, or buy a hydro manual
    then theres the whole auto to manual...
    you need to conver the motor to obd1

    all this for a 92 civic... for a motor that's going to make the same or less power than the one you already have.

    whats the point?
     
Verification:
Draft saved Draft deleted

Share This Page