1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ECU Pinouts... which ones do i need to use?

Discussion in 'ECU's, Electronics, and Tuning' started by 8secpounding, Feb 9, 2005.

  1. 8secpounding

    8secpounding Member

    Messages:
    44
    Likes Received:
    0
    Joined:
    Jul 18, 2004
    Sup guys.. been a while since ive been on the board BUT a friend of mine is putting a JDM b16a sir II in his 97 Lx and ive looked and looked and looked and i cant find the correct pinouts i need to use on the wiring harness to wire vtec. i know i need the oil pressure, knock and vtec wired but im not sure which pinouts to use! If somebody could help me out id GREATLY appreciate it.

    Thanks
     
  2. nfn15037

    nfn15037 Senior Member

    Messages:
    670
    Likes Received:
    0
    Joined:
    Mar 1, 2004
    Swap Articles
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    use the stock lx harness.
    get an obd2a->1 conversionharness for the p30 to plug into the car in the passenger kick area.
    add the wires for vtec/pressure/knock
    swap plugs on distributor, alternator, and injectors.
    done.

    as matt psoted above, all pinouts are there.
     
Verification:
Draft saved Draft deleted

Share This Page