1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

ecu's/chipped/problem

Discussion in 'ECU's, Electronics, and Tuning' started by Miguel_Acosta, Nov 4, 2003.

Thread Status:
Not open for further replies.
  1. Miguel_Acosta

    Miguel_Acosta Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 4, 2003
    I have installed a chip upgrade kit in my ecu (P06) but the car is not passing 4000 RPM's what should I do?
    Check engine light is on too.

    CIVIC LX/D16Z6/VTEC CONTROLLER/ :feedback:
     
    Miguel_Acosta, Nov 4, 2003
    Miguel_Acosta, Nov 4, 2003
    #1
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,432
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    1. Pull the code(s) your ECU is throwing.
    2. Post them here in a font a little easier to read.
     
    dohcvtec_accord, Nov 4, 2003
    dohcvtec_accord, Nov 4, 2003
    #2
  3. SolReaver

    SolReaver Senior Member

    Messages:
    1,515
    Likes Received:
    0
    Joined:
    Oct 6, 2002

    did you chip the ecu correctly?

    i think you should use a p28 ecu chipped with a sohc program, that way vtec will activate normally

    hey i have a chipped p28..trade me your chipped p06 and 100 bucks and we have a deal :)
     
    SolReaver, Nov 4, 2003
    SolReaver, Nov 4, 2003
    #3
  4. Miguel_Acosta

    Miguel_Acosta Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 4, 2003
    Well I had the engine working before i chipped the ecu and it was working fine, the selenoid is not connected to the ecu, thats why i've got the vtec controller.
    My only intention was to increase the fuel~and the Rpm's~
     
    Miguel_Acosta, Nov 4, 2003
    Miguel_Acosta, Nov 4, 2003
    #4
  5. Miguel_Acosta

    Miguel_Acosta Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 4, 2003

    Sorry I dont have a diagnostic computer.
     
    Miguel_Acosta, Nov 4, 2003
    Miguel_Acosta, Nov 4, 2003
    #5
  6. AllMotorMonster

    AllMotorMonster Senior Member

    Messages:
    542
    Likes Received:
    0
    Joined:
    Oct 13, 2002
    Location:
    Inland Empire foo!

    Your chip is not designed for your ECU.

    The code you are getting is "code 0" malfunctioning ECU

    Cut J1 and I'll bet your ecu works again.
     
    AllMotorMonster, Nov 4, 2003
    AllMotorMonster, Nov 4, 2003
    #6
  7. gocivicls

    gocivicls Senior Member

    Messages:
    266
    Likes Received:
    0
    Joined:
    Apr 20, 2003
    Location:
    forest city, NC
    I bet when you soildered some of the joints are touching each other and shorting out. Check the Eprom.
     
    gocivicls, Nov 4, 2003
    gocivicls, Nov 4, 2003
    #7
  8. Miguel_Acosta

    Miguel_Acosta Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 4, 2003

    Thanks I follow your advise, and there it was a small string of lead touching both r52 points.

    Now is working just perfect...... :worthy:
     
    Miguel_Acosta, Nov 5, 2003
    Miguel_Acosta, Nov 5, 2003
    #8
  9. Miguel_Acosta

    Miguel_Acosta Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Nov 4, 2003

    :fuckyou3: if you don't know, don't talk..... :fuckyou3:
     
    Miguel_Acosta, Nov 5, 2003
    Miguel_Acosta, Nov 5, 2003
    #9
  10. AllMotorMonster

    AllMotorMonster Senior Member

    Messages:
    542
    Likes Received:
    0
    Joined:
    Oct 13, 2002
    Location:
    Inland Empire foo!

    OMG, If I don't know??? :roll:

    Oh, you're killing me.....

    Go back to being a barnyard mechanic
     
    AllMotorMonster, Nov 5, 2003
    AllMotorMonster, Nov 5, 2003
    #10
  11. radnulb

    radnulb Senior Member

    Messages:
    674
    Likes Received:
    1
    Joined:
    Sep 23, 2003
    Location:
    Sinsinnaty, Ohio
    Celebrity deathmatch.... On the left we have AllMotorMonster, a mean, lean chipping machine. On the right we have Miguel Acosta... GLOBBY SOLDER MAN! Ladies and gentleman, place your bets! This fight is gonna be GRRRREEAT!

    :)
     
    radnulb, Nov 5, 2003
    radnulb, Nov 5, 2003
    #11
  12. D See 2

    D See 2 Senior Member

    Messages:
    2,405
    Likes Received:
    0
    Joined:
    Sep 29, 2002
    Location:
    Baltimore, MD

    fuck you. he was just trying to help YOU out. dickwad.
     
    D See 2, Nov 5, 2003
    D See 2, Nov 5, 2003
    #12
  13. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,432
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Closed because the started of this thread has a head-ass-reversal problem.

    :locked2:
     
    dohcvtec_accord, Nov 5, 2003
    dohcvtec_accord, Nov 5, 2003
    #13
Thread Status:
Not open for further replies.

Share This Page