EG project in. need help!!!!

We may earn a small commission from affiliate links and paid advertisements. Terms

Ricer Flyby

Junior Member
hey guys, honda newb here.... :unsure:

so anyways, i got an EG project. My budget is enough, lets leave it at that....;)


my goal is 11 sec. (hopefully with your help)

i dont know much about hondas and their engines, i know just a little.

so what do you guys think i should do?

thanks again for your time.
 
hope you have a bunch of money

b18c1 sleeved to 84 mm, 10.5:1 Wisecos, Pauter Rods. Crower Valvetrain, SC61, Full-Race manifold, 14 psi should do it.
 
quick question.....


the LS motor....what is it? the B18?

and how much money do you estimate your set up will cost me?
 
an LS is a b18b1, I have one...waiting for a few more turbo parts. Should put me in the 13s.

The setup I gave you.

b18c1 with trans...3500
Sleeving- 800-1000
Pistons- 4-600
Rods - I think they were around 400
Valvetrain- 2-3k
Turbo Setup - 4-5k
 
Someone will give you more accurate quotes, but figure like 15k at least to get you in the 11's without any suspension or frame modifications (which shouldnt be overlooked).
 
well 11's isn't a reasonable number so yeah.

12's are more realistic. 4-5k should get you there.

beerbongskickass hit 12s with his d series.

I defenitly will hit 13s and I didn't spend more than 2500.
 
thats why i am going to be happy with 13's or 14's..lol b16 with a small turbo
 
i couldv'e sworn you had a 60 trim...maybe I was imagining things.

If you do I may trade you for my 42/48 plus some cash
 
if you have money, but don't know a thing about cars, bring it to a shop.

tell them you want an 84mm sleved block, 9.5:1 compression fordged pistons, forged rods, and a full-race stage turbo kit with their t3/t67 turbo.
also, you want hondata, 1000cc injectors, and you want them to tune it.

pay your 15 grand, and go back in a month or two to pick it up :)
 
Back
Top