1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Engine harness Question please give responce

Discussion in 'HYBRID -> ED-EF / DA' started by 89b18a1, Apr 27, 2006.

  1. 89b18a1

    89b18a1 Junior Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Jan 31, 2006
    I think i found out why my b16 wont start because i used the b16 engine harness so my question is can i switch back to my dx harness without pulling the motor back out cause thats going to be a bitch
     
  2. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    you could, not easy, but can be done - if you have 88-91 DX, you will need to do the wiring changes on the harness to convert it from DPFI to MPFI
     
  3. CrazyAzn

    CrazyAzn Senior Member

    Messages:
    345
    Likes Received:
    0
    Joined:
    Mar 26, 2003
    its not hard, and you dont have to take out the motor. seeing as you plug everything in after the motor is in the car. . . so all you do is take it back off and plug in the other one. . .

    your dx harness will need to be converted to MPFI
     
Verification:
Draft saved Draft deleted

Share This Page