first swap project

[streetsucka]

alright well i have a 95 dx coupe 5spd and i want to put in a B16A2 motor and manual trans. i want to know more before i even get into it but im having trouble finding a source for referance, or guide in doing the swap. from what i think i know its basically take the old motor, trans, ecu and replace it with the new motor, trans and ecu. but im sure its not that simple. other things too like engine mounts, can i use the existing ones, or will the exhaust from the new motor go with the old one and so on. anyways if anyone can give me more info on this or direct me to a link or something that would greatly be appretiated, thanks in advanced

 

[CAFROG]

B16A2 motor mounts, axles and shift linkage need to be added to the list

Wire for VTEC and Knock Sensor ran from motor to ECU.
(Attach to ECU by getting pins from a donor ECU clip,,,,or half ass it as you please)

Use the DX wiring harness or the B16A2 (USDM) if it comes with it.

I 'think' your throttle cable is too short and you need the B16A2 throttle cable or....??