Well, my friends finally took my advice and jumped into the import world of engine building. Tim Allen Motorsports (214) 391-7562 626 Southeast Dr Dallas, TX 75217 I am just starting on the web page, but we are distributors for Dart, JE/SRP, Comp Cams, Eagle, Corillo, Oliver and whole lot more. I am going to get prices for the b-series block, but if you call and say you heard about him from Fritts on Hondaswap, he said he'd cut yall a pretty good deal on the stuff. Dart doesnt make full blocks for H or D series, so if you want that stuff done, he can sleeve your blocks for you as well. http://timallenmotorsports.net As i said, im making the website, and he needs his price sheets for the customer calls that he gets. I should have all the block prices updated by next weekend and hopefully have the entire site (heads and all) ready by early december. If you want a full engine, extra work done (sleeving, assemblying, boring, etc), or you just need parts for your engine (D, B and H series included) this is the guy to call. **EDIT** Dart B-series (B18 and B20) Blocks $2129.40 Free Shipping anywhere in the US Dart B-series (B18 and B20) heads $3031.69 Built (no cams) with Free Shipping $2568.28 Bare with Free Shipping JE Pistons B, H, and K series $123.47 each (493.88 per set) with Free Shipping in the US. Eagle H-beam Rods for all Honda/Acura $350.00 with Free Shipping Zex Dry Nitrous For Honda/Acura $539.95 with Free Shipping Zex Wet Nitrous For Honda/Acura $599.95 with Free Shipping Zex Direct Port Systems $709.95 with Free Shipping BUT AGAIN, CALL FOR BEST PRICES. AND TELL THEM FRITTS SENT YOU. If you have any question on parts, just leave me a PM or post it here, i should have most of the answers you need. We can also build bottom ends and just about do everything you will need. Only thing we cannot do is PnP heads really.