1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

FS:LMA mod, VTEC Sensor, Si Stereo, B-Series Trans., Accord trans/motor

Discussion in 'Parts: For Sale/Trade/Wanted' started by K2e2vin, Feb 10, 2008.

  1. K2e2vin

    K2e2vin Senior Member

    Joined:
    Jan 2, 2003
    Messages:
    8,443
    Likes Received:
    92
    Location:
    Raleigh, NC
    Everything located in Raleigh, NC. Pick-up preferred, but shipping available at buyer's expensive(although I'll try to help keep shipping costs to a minimum).

    For those interested in the LMA mod, I have PCB(+98 Prelude)LMA springs and washers. NIB(one bag opened just to check it, and bag of washers open to inspect also): $100 OBO
    [​IMG]

    VTEC Oil Pressure sensor, NIB: $45
    [​IMG]

    1999 Civic Si CD Player head unit stereo(key available): $50 OBO
    [​IMG]

    Y80 LS transmission; busted FD and needs new case(leaks) but I have a GSR differential and gear-set(new 4th gear/synchro, 5th syncrho would need to be swapped from the LS) to swap in. LS gearset is still good though: $500 OBO
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]
    [​IMG]

    GSR Open differential: $55 OBO
    (Pic tomorrow)

    1990 Accord LX 5-spd transmission(173k miles); $75 OBO
    [​IMG]

    1990 Accord F22A1 engine(missing distributor, o2 sensor, wiring harness, and VC bolts) $110 OBO(Pending, but guy hasn't called me back...so I guess it's up for grabs)
    [​IMG]

    1990 Accord Climate control+harness(can be swapped into EF's or other) and 5-speed Gauge cluster(163k). $30 for Climate and BO for cluster. I also have a 88 Civic climate control available if anyone is interested, for $25(not cracked!!! But does not have A/C button). If the Civic one is sold, then I'll be keeping the Accord one and vice versa.

    PM me for more information. I want these gone quick but do not low ball me. Will consider trades for P05/P06/P08/P28 ECU's, SOHC VTEC cam or D-series performance parts, PMS(Civic GX) pistons, B18C ITR rods, or cheap D-series swap(non-Si 92-95)
  2. b16chaser

    b16chaser New Member

    Joined:
    Sep 27, 2007
    Messages:
    117
    Likes Received:
    1
    gotta stock Y8 cam if you want, make an offer...
  3. K2e2vin

    K2e2vin Senior Member

    Joined:
    Jan 2, 2003
    Messages:
    8,443
    Likes Received:
    92
    Location:
    Raleigh, NC
    I'm sorry I was referring to aftermarket cam("name-brand" regrind are OK).
  4. b16chaser

    b16chaser New Member

    Joined:
    Sep 27, 2007
    Messages:
    117
    Likes Received:
    1
    i have a zex one, sale is pending on the whole motor, if person dosent buy it i'll let you know first, i dont know model # off had but its the one you can use your stock v.springs and retainers with.
  5. K2e2vin

    K2e2vin Senior Member

    Joined:
    Jan 2, 2003
    Messages:
    8,443
    Likes Received:
    92
    Location:
    Raleigh, NC
    Well, if it's a 59300/105300 I may be interested(I'm already running that). Just let me know how much you're asking for it. Thanks.

Share This Page