1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Fuel Injector Resistor

Discussion in 'HYBRID -> EG-EK / DC' started by ohmstable, May 13, 2003.

  1. ohmstable

    ohmstable Senior Member

    Messages:
    147
    Likes Received:
    0
    Joined:
    May 4, 2003
    Location:
    Toronto, Canada
    I don't see the fuel injector resistors on this car. I'm currently working on an H22 swap and I know that the prelude uses the fuel injector resistors. Now I was wondering if its possible for me to wire it up without the resistors or do I have the get the resistors from the prelude?
     
  2. solblu

    solblu Senior Member

    Messages:
    378
    Likes Received:
    0
    Joined:
    Jan 17, 2003
    Location:
    Ricer
    No you don't have one. What year/model swap are you doing? Some of the prelude are the same resistance as the Civic injectors.
     
  3. ohmstable

    ohmstable Senior Member

    Messages:
    147
    Likes Received:
    0
    Joined:
    May 4, 2003
    Location:
    Toronto, Canada
    I'm not sure what year car the engine is from, It is however an JDM H22a. Is there anyway of knowing what year the engine is from the numbers on the block (right under where it says H22a)??
    I'm pretty sure its from a 92-96 prelude.
     
  4. solblu

    solblu Senior Member

    Messages:
    378
    Likes Received:
    0
    Joined:
    Jan 17, 2003
    Location:
    Ricer
    Well then check the resistance on the injectors. Compare your stock to the h22. there is a how to on my site if you don't know how, You will need a multi meter
     
  5. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
  6. ohmstable

    ohmstable Senior Member

    Messages:
    147
    Likes Received:
    0
    Joined:
    May 4, 2003
    Location:
    Toronto, Canada
    Actually I checked the resistance on the H22 injectors and they are ~3ohms so I'm going to have to install the injector resistors. Pain in the ass..
     
Verification:
Draft saved Draft deleted

Share This Page