1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Got a question about the First Gen CRX panhard bar.

Discussion in 'Civic and CRX - EW' started by Ryma, Sep 1, 2006.

  1. Ryma

    Ryma Member

    Messages:
    239
    Likes Received:
    2
    Joined:
    Sep 1, 2006
    I read the FAQ on the first gen info in swap articles and itmentions that if you lower the rear you ahve to mod the panhard bar to relocate the axle.

    I got to thinking about adjustale panhard bars that are out there for other applications cause I couldent find any info about a ready made one, the site I was told to look at dosent exist anymore.

    So thru out my mustang years I ammased alot of info and got to thinking about what if I take the panhard rod from Maximum Motorsports :: The Leader In Mustang Performance Suspensions its adjustable but they dont say anything about the length and adjustment lengths.

    Iam gonna email them asking them how long it is and Iam gonna ask here if it will work.

    If anyone has any info about a wearabouts of a site that does make them where the site is still active and will be for years please let me know.
     
  2. reckedracing

    reckedracing TTIWWOP VIP

    Messages:
    21,056
    Likes Received:
    1,180
    Joined:
    Dec 5, 2002
    Location:
    NY
    doesn't the crx faq have instructions on how to make one?
    i think custom is really you're only hope for something like this...
     
  3. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs
    i think they just have different web address - try here (you will have to call them to find out what they have)

    OPM Autosports | PRODUCTS
     
  4. Ryma

    Ryma Member

    Messages:
    239
    Likes Received:
    2
    Joined:
    Sep 1, 2006
  5. TurboMirage

    TurboMirage YEEAAAHHH VIP

    Messages:
    24,577
    Likes Received:
    696
    Joined:
    May 20, 2003
    Location:
    Central, MA
  6. 1gcvcb18

    1gcvcb18 New Member

    Messages:
    53
    Likes Received:
    1
    Joined:
    Aug 16, 2006
    I saw one on ebay.com for an 86-89 integra its a Skunk 2. It looks like it will work check it out item number 300029924869. It should fit the first gen crx 3 gen civic.
     
  7. hosmer

    hosmer I made the millionth post VIP

    Messages:
    3,162
    Likes Received:
    82
    Joined:
    Jan 26, 2005
    Location:
    B R I D G E W A T E R
    The stock panhard bar is about 30" long. They sell "universal" 30" ones on ebay that'll work...they're like $75


    The OPM ones are waaaay more
     
Verification:
Draft saved Draft deleted

Share This Page