1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Got Engine. Now What?

Discussion in 'HYBRID -> EG-EK / DC' started by civic-style, Feb 14, 2004.

  1. civic-style

    civic-style Junior Member

    Messages:
    17
    Likes Received:
    0
    Joined:
    Jul 11, 2003
    I just got my JDM SiR-II in and it is going in my 95 civic. I know I have to replace water pump, timing belt, plugs & wires, cap & rotor and tensioner pulley. Now it came from hmotors and all of the hoses and wiring harness are cut. Do I have replace the hoses or can I use the ones from my old engine. Also do I buy parts for a Del Sol.
     
  2. E_SolSi

    E_SolSi Member of the 20 nut club Moderator VIP

    Messages:
    30,036
    Likes Received:
    3,970
    Joined:
    Sep 28, 2002
    Location:
    CT
    get the hoses for a del sol VTEC
     
  3. driverunknown

    driverunknown Senior Member

    Messages:
    1,474
    Likes Received:
    1
    Joined:
    Feb 11, 2004
    Clean it up real good and check the clutch. Just in case.
     
  4. JDMilan

    JDMilan Senior Member

    Messages:
    6,730
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Boca Raton, FL
    spark plugs also, fresh oil, i would do the clutch and a new flywheel/resurface.
     
  5. vtecsir1

    vtecsir1 Senior Member

    Messages:
    3,313
    Likes Received:
    17
    Joined:
    Dec 5, 2002
    Location:
    Orlando, FL

    yes do as milan says. if you dont change the clutch out first and you install the motor it wont be fun installing a new clucth after its in.
     
Verification:
Draft saved Draft deleted

Share This Page