1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Gsr And Ls Wiring Harness.

Discussion in 'HYBRID -> EG-EK / DC' started by 97dc4, Jun 3, 2003.

  1. 97dc4

    97dc4 Junior Member

    Messages:
    25
    Likes Received:
    0
    Joined:
    Jun 3, 2003
    Which part of the gsr wiring harness do I need to use to swap my gsr motor into my ls? Do I need to cut any wires? I have the entire complete wiring harness from my gsr donor. I have all the dash wiring and abs, every wire you can imagine. What part will I actually need to use? Just the engine wiring part?
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    the your GSR and LS are the SAME obd, and obd1, use the motor harness, plug it in at the passenger side shock tower (3 connectors i beleive) and then run the 7 wires for vtec/IAB/knock
    see: http://www.hondaswap.com/swap/viewer.php?id=57
     
  3. primo

    primo Guest

    What about for OBDII in same situation? i did the same thing.
     
  4. Fox_137

    Fox_137 New Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    Sep 8, 2006
    so i am doing to same thing. i got a 1993 acura integra and i am putting a 1995 GSR. will i need the wiring harness from the gsr motor???
     
  5. VTECin5th

    VTECin5th Administrator

    Messages:
    2,182
    Likes Received:
    4
    Joined:
    Apr 17, 2005
    Location:
    Phoenix Az
    Yes, use the GSR harness, add the wires from the ecu to the shock towers.
     
Verification:
Draft saved Draft deleted

Share This Page