1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

GSR Cams in a JDM B16???

Discussion in 'HYBRID -> EG-EK / DC' started by 9k RPM EG6, Oct 25, 2003.

  1. 9k RPM EG6

    9k RPM EG6 Junior Member

    Messages:
    27
    Likes Received:
    0
    Joined:
    Oct 23, 2003
    Location:
    originally: Napa, CA now: Phoeniz, AZ (for school)
    Is it worth the swap for the power increase? I've been receiving mixed answers. I know exhaust duration is slightly shorter, but they increase lift. Intake duration/lift is higher. The cams are USDM GS-R spec. I've been told they add power if installed in the JDM 2nd generation B16. Cam installation is simple as it goes, but not worth my time unless I'll notice a power increase. If some one could confirm the power increase/or shoot it down for sure, I'd appreciate it! Thanks!

    -Brian

    Feel free to e-mail me personally @ LoveMyBSeries@aol.com
     
  2. allgo

    allgo Senior Member

    Messages:
    195
    Likes Received:
    0
    Joined:
    Sep 13, 2003
    go tpye r or ctr. gsr will not do too much but its up to u
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    the gsr is slighty bigger, but you won't see much of a gain from it. frankly, i don't think its worth the time to swap out. 2-3 whp??? maybe a couple more in the midrange...
     
Verification:
Draft saved Draft deleted

Share This Page