1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

gsr throttle cablle into eg civic

Discussion in 'General Tech and Maintenance' started by juicedz, Mar 1, 2007.

  1. juicedz

    juicedz Member

    Messages:
    161
    Likes Received:
    2
    Joined:
    Jan 26, 2007
    Location:
    edgewood, md
    I have a b18c and cant seem to get the throttle to go right. I have a gsr cable. Looks like on the integra it goes along the firewall to the throttle body. IS this how I need to run it or should it go under the intake plenum. Thnx in advance. I fyou have a pic that would be appreciated.
     
    Last edited: Mar 1, 2007
  2. GSRCIVICTN

    GSRCIVICTN Lost in a sea of rednecks

    Messages:
    431
    Likes Received:
    3
    Joined:
    Feb 10, 2006
    Location:
    Nashville, TN
    I ran mine along the firewall and back around to the throttle body. It touches the hood but it doesn't hurt anything(no lost paint on hood, no worn cover for cable).
     
  3. juicedz

    juicedz Member

    Messages:
    161
    Likes Received:
    2
    Joined:
    Jan 26, 2007
    Location:
    edgewood, md
    I decided to re-bend the factory bracket on the drivers side shock tower and put ti on the fire wall. Seems to work so far.
     
Verification:
Draft saved Draft deleted

Share This Page