1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22 90 DX accord Question

Discussion in 'ECU's, Electronics, and Tuning' started by coleon, Dec 12, 2003.

Thread Status:
Not open for further replies.
  1. coleon

    coleon Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Dec 12, 2003
    Well I have a new project, 90 dx accord, and I put a 94 Jdm H22a in it, and I know everone say's to strap the accord harness on and wire the few vtec and pressure sensor wires, But I have no accord harness to strap on, I have labeled the p13 h22 harness ( 5 plugs ) and have the 3 engine bay plugsin the accord left to do, most of them tone out and can be referenced on the ecu pinout, but some cant, mainly because perhaps they run to the dash, But I was hoping someone would have the helms 90 accord and could tell me what number plug they are and what they are according to color, and yes the car is obd1 and is simple, but 2650 in a motor I would like to identify all wires and just connect the 5 plugs on h22 to the 3 on 90 accord, and run a could extra, If any one can help me, or atleast point me in the right direction, I would be greatly apprechieted, Thanks Cole
    coleon@mindspring.com
     
  2. radnulb

    radnulb Senior Member

    Messages:
    674
    Likes Received:
    1
    Joined:
    Sep 23, 2003
    Location:
    Sinsinnaty, Ohio
    save yourself the pain and suffering. Accord harnesses are a dime a dozen in the yards around here... You really need one to do the swap easily due to thee connectors at the shock tower being pretty different.
     
  3. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Please refer to our FAQ. There is no need to post your topic more than once.

    This topic has been closed by a moderator. Please continue your question in the other thread that you started.

    Thanks, Moderating Team

    :locked2:
     
Thread Status:
Not open for further replies.

Share This Page