1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22 and F22B2 wiring harness questions

Discussion in 'HYBRID -> BA-BB /CA-CD' started by Bird333, Aug 12, 2004.

  1. Bird333

    Bird333 Member

    Messages:
    38
    Likes Received:
    0
    Joined:
    Apr 12, 2004
    1. In comparing USDM OBD2 Preludes and Accords, are the connectors for the dizzy the same on the engine harness (same shape, number of wires, etc)?

    2. Is the USDM OBD1 Prelude connector(s) on the engine harness for the dizzy the same as the OBD2 Accord dizzy connectors?

    3. Are the Vtec connectors on a USDM OBD2 Prelude harness the same as a USDM OBD1 Prelude harness?

    TIA
     
  2. tab

    tab Super Moderator

    Messages:
    3,839
    Likes Received:
    46
    Joined:
    Jan 10, 2003
    Location:
    Aberdeen, Washington State
    1. Probably close, but I'm not sure.

    2. I doubt it. Even if they plugged in, the OBD 1 dizzy has extra sensors inside that aren't there in OBD 2 dizzies.

    3. Don't really know, but wiring VTEC is cake. F22B2 isn't VTEC is it? Keep in mind that you'll be using your stock harness for the swap, just modified.
     
Verification:
Draft saved Draft deleted

Share This Page