1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

h22 knocking in first gear please help?

Discussion in 'General Tech and Maintenance' started by mikegeezy, Apr 24, 2006.

  1. mikegeezy

    mikegeezy Junior Member

    Messages:
    19
    Likes Received:
    0
    Joined:
    Apr 6, 2006
    ok got the h22 put in and everything works fine except if i am at a stop and i take off in first and i floor it there is a loud knocking noise coming from the driverside cv axle it happens if i pop the clutch in first to launch or like when i take off to fast in first it dosent do it in any other gears only first and only when i get on it what could it be? h22 into ek civic with hasport axles and hcp mounts.
     
  2. MikeBergy

    MikeBergy Blah blah blah....

    Messages:
    3,646
    Likes Received:
    1
    Joined:
    Oct 9, 2003
    Location:
    Central Coast, CALI
    probably a bad intermediate shaft. Just wondering, is your sway bar hooked up? I was having a similar problem that you describe. But the noise from my cv only came when I was going around hard left corners. I found out the sway bar had become disconnected from the left front hub, and I'm guessing the cv joint was being extended too far. Since I've replaced the sway bar endlinks, the problem is gone.
     
Verification:
Draft saved Draft deleted

Share This Page