1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

h22 shifting cable

Discussion in 'HYBRID -> EG-EK / DC' started by h22ej1, Jul 13, 2003.

  1. h22ej1

    h22ej1 Junior Member

    Messages:
    6
    Likes Received:
    0
    Joined:
    Jul 13, 2003
    i was wondering how do you run the prelude shifting cables in a 92-95 civic....thanx :doh:
     
  2. HatchSpeeD

    HatchSpeeD ...Hi...

    Messages:
    1,241
    Likes Received:
    0
    Joined:
    Apr 14, 2003
    Location:
    Beantown
    I think place racing has a kit for the shifter assembly but basically you gotta drill holes for the shifter cables to run through. Then either get the kit for the shifter or weld the prelude shifter on. Good luck B)

    BTW i've never done this, its just a guess so to speak, so ask someone who has.
     
  3. ohmstable

    ohmstable Senior Member

    Messages:
    147
    Likes Received:
    0
    Joined:
    May 4, 2003
    Location:
    Toronto, Canada
    i used the prelude shifter assembly and cables. Just had to enlarge the shifter opening and also cut a hole under the dash for the cables to run outside. You will also have to build a cover from the underneath so the shifter assembly is sealed from the outside. The cables are just long enough to reach the tranny but it worked great for me. You'll get a better idea from the pictures.

    Hmm.. dunno how to post the pics here so just PM me your email address and I'll send you some pictures of my install.
     
Verification:
Draft saved Draft deleted

Share This Page