1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22A into EG install?

Discussion in 'HYBRID -> EG-EK / DC' started by EG hatchie94, Sep 28, 2004.

  1. EG hatchie94

    EG hatchie94 Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Sep 28, 2004
    Location:
    Spartanburg, SC
    i'm new to this site and i've read around and searched...great info on here but i couldn't come up with a how-to on putting an H22A into an EG hatch. i plan on doing this swap very soon and if i had a how-to it would make everything go so much easier. i'd appreciate any input. thanks in advance :worthy:
     
  2. EG hatchie94

    EG hatchie94 Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Sep 28, 2004
    Location:
    Spartanburg, SC
    anyone?
     
  3. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    buy the mounts and the shifter shit from hasport.com, wire it up, and drop it in. its really not hard
     
  4. egzivic

    egzivic Junior Member

    Messages:
    4
    Likes Received:
    0
    Joined:
    Aug 23, 2004
    true, just make sure you have all the parts before you start, plus an extra $300-$500 for things that might come up when you start (the always do). I just finished this swap for the third time and it really isn't any more or less difficult than any other swap. Just one thing, make sure you compression test the motor before you start. Nothing worse than getting everything together only to have to take it all back out.
     
  5. EG hatchie94

    EG hatchie94 Junior Member

    Messages:
    5
    Likes Received:
    0
    Joined:
    Sep 28, 2004
    Location:
    Spartanburg, SC
Verification:
Draft saved Draft deleted

Share This Page