1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22a Swap Fuel ?

Discussion in 'HYBRID -> BA-BB /CA-CD' started by Bigjokerdaddyh22, May 5, 2003.

  1. Bigjokerdaddyh22

    Bigjokerdaddyh22 Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Feb 5, 2003
    I recently did a H22a swap into my 95 Accord
    My Question is should i have swapped out fuel pumps?
    I ran my car on the dyno and it was running extremly lean
     
  2. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    Your stock pump will be fine. The engine may have been sitting aorund for awhile, maybe you need to run some injector/fuel treatment through the system. Do you have a fuel pressure regulator? If not, you may want to get one to bump up the pressure a few psi.
     
  3. 1991AccoLudeCoupe

    1991AccoLudeCoupe Member

    Messages:
    91
    Likes Received:
    0
    Joined:
    Apr 4, 2003
    Location:
    G'ville, SC
    The new pump wouldn't have hurt anything though :D

    Peace, Theron <_<
     
  4. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    No, it won't hurt anything, but if he's running an upgraded pump on a stock regulator, rail and injectors, it won't cause him to run any closer to stoich.
     
  5. 1991AccoLudeCoupe

    1991AccoLudeCoupe Member

    Messages:
    91
    Likes Received:
    0
    Joined:
    Apr 4, 2003
    Location:
    G'ville, SC
    :werd: I feel ya' mang. That is what I meant by this whole drawn out post. The whole fuel system... :blink:

    You r still the man :worthy: ! Calm yourself...have a beer B)

    Peace, Theron <_<
     
  6. Bigjokerdaddyh22

    Bigjokerdaddyh22 Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Feb 5, 2003
    Thanks guys but i just replaced the stock fuel pump witha performance one and i put my b&m regulator on. But my A/f Gauge still reads lean i gonna try a different gauge and see what happens
     
Verification:
Draft saved Draft deleted

Share This Page