1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

H22A Swap Questions

Discussion in 'ECU's, Electronics, and Tuning' started by MugenPower86, Mar 9, 2004.

  1. MugenPower86

    MugenPower86 Junior Member

    Likes Received:
    Mar 9, 2004
    First off i want to know if the prelude type s motor, the obd2 97-01 year engines harness will plug into the cx eg wiring harness, granted i know ill have to rewire stuff. I also want to know if the stock eg harness will plug into the obd2 ecu, or what alternative can i take.

    I also would like to know if the 92-96 prelude vtec motors harness will plug into the cx eg harness.

    And if anyone has pictures or information on H22 swap into eg other then the info on this site please give it to me.

    I would also like to know what kind of welding has to be done to get the H22 tranny into the eg, if it requires any at all.
  2. pissedoffsol

    pissedoffsol RETIRED

    Likes Received:
    Sep 28, 2002
    Retirement Home
    No. the obd2 harness will not plug into the obd1 plugs on the shock tower. they might physically plug, but the wires inside are not in the same positions.

    no welding is required for an h22 swap with a proper mount kit
Draft saved Draft deleted

Share This Page