1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Have to run a knock sensor wire!!! Where to run it to

Discussion in 'HYBRID -> EG-EK / DC' started by Christian_D, Sep 27, 2008.

  1. Christian_D

    Christian_D New Member

    Messages:
    6
    Likes Received:
    0
    Joined:
    Sep 26, 2008
    Location:
    Vancouver, BC
    I have a b16a2 going into my car and I am using my d16y8 harness. I have to run a knock sensor wire to the ECU so I dont throw codes. I have an obd2 p30 ecu and I have no clue where to run it to.... and I dont know what part it A, B or D on the ECU.

    Please help me so I can get my car running soon
     
  2. cjvictoria

    cjvictoria New Member

    Messages:
    2,525
    Likes Received:
    42
    Joined:
    Sep 22, 2008
    Location:
    N. Chuck, SC
    all i know really is that there is an ecu diagram somewhere on hondaswap that tells you about a,b,c, and d but cant remember where
     
  3. tabKola

    tabKola New Member

    Messages:
    326
    Likes Received:
    5
    Joined:
    Jul 3, 2008
    Location:
    Tewksbury MA
    It should go to pin 3 on connector C if the wire harness and ecu are both obd2b and if their obd2a then it will go on pin 6 on connector d. 1996-1998= obd2a 1999-2000= obd2b
     
    Last edited: Sep 27, 2008
Verification:
Draft saved Draft deleted

Share This Page