1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

head swap help!

Discussion in 'Civic and CRX - EW' started by midwestcivic93, Apr 9, 2008.

  1. midwestcivic93

    midwestcivic93 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Apr 8, 2008
    Sorry if this is in the wrong disscusion.... But I really need some helpful advice..

    I swapped my D15b7 head with a D16y7... Now everything bolted right back on and everything. Replaced wires n plugs. I don't know what happened it doesn't give off enough spark... Do i need a new distrubitor, better wires, alt?

    Please help...
     
  2. t3t4delsol

    t3t4delsol New Member

    Messages:
    652
    Likes Received:
    12
    Joined:
    Mar 18, 2008
    Location:
    York, Pa
    timings probly off, did you set the timing?
     
  3. midwestcivic93

    midwestcivic93 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Apr 8, 2008
    ..

    Yah I think it moved a tooth on the crank when I put it on... But the head was right where it needed to be. But shouldn't it still at least start?
     
  4. t3t4delsol

    t3t4delsol New Member

    Messages:
    652
    Likes Received:
    12
    Joined:
    Mar 18, 2008
    Location:
    York, Pa
    the head and block both need to be at tdc
     
Verification:
Draft saved Draft deleted

Share This Page