1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Header Removal

Discussion in 'General Tech and Maintenance' started by 97hatch, Apr 15, 2003.

  1. 97hatch

    97hatch ?

    Messages:
    1,695
    Likes Received:
    20
    Joined:
    Feb 6, 2003
    Location:
    Anderson IN
    im going to take my header off and i wanted to know it i would need to replace the gasket when i pit it back on and will a stock gasket work ok and what is the bast pain to use my header is starting to rust and i dont want that son any help would be great
     
  2. rsaeini

    rsaeini Senior Member

    Messages:
    1,415
    Likes Received:
    0
    Joined:
    Jan 15, 2003
    Location:
    Los Angeles, CA
    are you replacing the header with an aftermarket one or another stock one??? you didn't specify.
     
  3. dohcvtec_accord

    dohcvtec_accord WRX Sellout

    Messages:
    8,433
    Likes Received:
    1
    Joined:
    Sep 29, 2002
    Location:
    The left lane
    It shouldn't matter TOO much whether it's stock or aftermarket. As long as the gasket is in good shape (not rusted too badly, and it hasn't separated), it should be OK top reuse. Although, they only cost $15-$20 at Honda, so if you want to be safe, just replace it.
     
Verification:
Draft saved Draft deleted

Share This Page