1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help for install of Phantom tach in 98' CX Hatch

Discussion in 'ECU's, Electronics, and Tuning' started by SpOoN EK9, May 18, 2004.

  1. SpOoN EK9

    SpOoN EK9 Junior Member

    Messages:
    22
    Likes Received:
    0
    Joined:
    Oct 6, 2003
    I just recently gotta a Phantom tach from a friend and was wondering how to wire it to my 98' CX hatchback since it didn't come stock with a tachometer. I heard that you connect the green wire to the blue wire near the fender but dont know exactly how to wire the rest of the wires. Any help would be appreciated, thanx
     
  2. wickedclwn05

    wickedclwn05 New Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Nov 8, 2006
    ive got the same car and put a tach in the red wire is switched power and white is illumination black of course is ground green is supossed to conect to the blue wire on the distrib but i did that and it didnt work so im just stuck there
     
  3. AHHVTEC

    AHHVTEC Well-Known Member VIP

    Messages:
    13,122
    Likes Received:
    245
    Joined:
    Oct 13, 2006
    Location:
    Alabama
    ok in that car there is a wire up by the windsheild in the corner on the driver side its one wire with a black cover over the end, hook it to that and it will work properly
     
  4. wickedclwn05

    wickedclwn05 New Member

    Messages:
    35
    Likes Received:
    0
    Joined:
    Nov 8, 2006
Verification:
Draft saved Draft deleted

Share This Page