1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HELP!! GSR/EG swap wiring

Discussion in 'HYBRID -> EG-EK / DC' started by andyboy, Feb 7, 2004.

  1. andyboy

    andyboy Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 7, 2004
    Im putting a 2000GSR into my 93cx hatch with a p08 ecu...
    i cant get the wires to line up! can someone who did a similar swap please help me out with some diagrams?
    i need the gsr ecu pinout diagram and the harness pinout diagram.

    i searched hybrid garage and the diagram is way to small to read!
    i also did a search here but nothing.
    please help
     
  2. xj0hnx

    xj0hnx I wanna be sedated VIP

    Messages:
    14,172
    Likes Received:
    48
    Joined:
    Nov 10, 2002
    Location:
    C.C.TX.
    So you're doing a OBD IIb swap into an OBD I car and the wiring is all fucked up? Read through the "swap" section in the main forums page.
     
  3. asmallsol

    asmallsol Super Moderator

    Messages:
    8,074
    Likes Received:
    3
    Joined:
    Sep 28, 2002
    Location:
    Houghton/Livonia Michigan
    why are you using the p08? That has no VTEC capabilitys. You could run a Chiped p28, but then you would have no knock sensor, and your IABs would not work, but it will run. Other option, is to just use an OBD1 p72 ECU then run like 4 wires.
     
  4. andyboy

    andyboy Junior Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Feb 7, 2004
    no i have a chipedp08
     
Verification:
Draft saved Draft deleted

Share This Page