help me guys

We may earn a small commission from affiliate links and paid advertisements. Terms

alex_b17a1

Junior Member
i have searched and i have found that:
white wire: D14
Green wire:D22
(1) Black wire:A6
(2) Black wire: A25
now, my problem is that there are already wires going into D22, A6, A25 should I cut the existing wires and put the wires from the o2 into those spots or should I just splice into those wires. Your help is appreciated. Thanks
 
buy(or find out of a wreaked car @ the scrap ward) an obd1 o2 sensor, with a four wire connection.. and snap it into place.
 
Back
Top