1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help Me With Wiring Vtec Stuff

Discussion in 'ECU's, Electronics, and Tuning' started by sweetcivicinlex, Mar 11, 2003.

  1. sweetcivicinlex

    sweetcivicinlex Member

    Messages:
    53
    Likes Received:
    0
    Joined:
    Feb 20, 2003
    Location:
    VA
    Help me, i have a 97 civic dx and i am putting a 99 si b16a2 SiRII in it and im not sure how to wire all the vtec stuff. If you have any comments leave them and also tell me what to hook up. Also if i dont hook up the vtec what will the redline be. Thanx
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    54
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    uhhhhh what motor do you have? you listed to.

    99-00 civic si USDM = b16a2
    92-95 civic SiR JDM = SiR2

    assuming you have the b16a2.....

    If you can, get the ENTIRE harness from the civic Si for the motor all the way to the ECU through the firewall.
    if you get that and run it through the car, it should be near plug and play, and vtec is already on the wire hanress, the ecu, and the motor.
     
  3. pills_PMD

    pills_PMD Super Moderator

    Messages:
    4,232
    Likes Received:
    0
    Joined:
    Sep 30, 2002
    Location:
    New Albany, OH
    i've talked to him. it's an OBD2 sir II from some web page that doesn't list prices.
    i assume that it is a b16a2, or similar enough to be wired the same.
     
  4. AllMotorMonster

    AllMotorMonster Senior Member

    Messages:
    542
    Likes Received:
    0
    Joined:
    Oct 13, 2002
    Location:
    Inland Empire foo!
Verification:
Draft saved Draft deleted

Share This Page