Help Needed on 91 crx b16 swap

[phillipprovost]

I did a b16 swap on my 91 crx si and now it will not start it gets fule and spark but wont start every once in a while all the lights on the dash will come on like the check engine, seat belt, door, brake ect. and it wont get fuel or spark. i have no idea what is wrong it is throwing codes 6 10 and 20 please help.
Thanks PHIL

 

[brian11to1]

6. ECT Unplugged or defective. Engine Coolant Temp Sensor

10. IAT unplugged or defective. Intake Air Temp. Sensor

20. ELD unplugged or defective. Electronic Load Dedector Sensor.

Good luck... check the main relay.

 

[phyregod]

Quoted post[/post]]
6. ECT Unplugged or defective. Engine Coolant Temp Sensor

10. IAT unplugged or defective. Intake Air Temp. Sensor

20. ELD unplugged or defective. Electronic Load Dedector Sensor.

Good luck... check the main relay.

He got you covered, lol.. Good luck +1

Let us know how it turns out.

 

[B16CRX]

I would say it is a relay. but correct those CELs too.

 

[JayDeeEmDC4]

from what i have experienced almost every swap gets code 20 u have to change the fuse box to fix it i hear...hope that helps

 

[B16CRX]

why would you change the fuse box to get rid of a CEL? I dont have a code 20 and am using the factory box.

 

[focuscrxsi]

mostly for a code 20 u need better battery cables if u have spark and fuel check ur wiring sequence on ur spark plug wires ur car shoudl start like that anyways with those engine codes