1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help Please B16-A with B18 GSR Head

Discussion in 'General Tech and Maintenance' started by Fujizero, Sep 2, 2006.

  1. Fujizero

    Fujizero Rookie

    Messages:
    1
    Likes Received:
    0
    Joined:
    Sep 2, 2006
    :D Yes Im a rookie .. I have a 89 crx si and i bought a B16-A with a B18 GSR Head engine obd1. I got a obd1 ecu wire harness for obd0 to obd1 installed to the most of my ability.
    but i dont have enough sensor plugs on my harness for AIR INTAKE SENSOR , TROTTLE POSITION SENSOR , ELECTRONIC AIR CONTROL VALVE , I HAVE one sensor plug on harness to plug THE MAP SENSOR I THINK THE PLUG GOES THERE ..Please help i had some guy woking on the car but he never came back to finish it . i got it to start but i asume all the sensors have to be pluged .. the car has lots of power like i would asume it would run just fine but like i said i think i need to plug al sensors before i drive of .. help me with this nightmare someone please :D thanks in advance..
     
  2. pissedoffsol

    pissedoffsol RETIRED

    Messages:
    49,693
    Likes Received:
    53
    Joined:
    Sep 28, 2002
    Location:
    Retirement Home
    you'll need to score the plugs off a spare wire harness (something obd 1 and b-series preferrably) and then wire it up. pin outs are in the reference section
     
Verification:
Draft saved Draft deleted

Share This Page