1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Help to confirm 94 ex motor into 95 lx car

Discussion in 'Accord' started by Stock95, Nov 24, 2007.

  1. Stock95

    Stock95 New Member

    Likes Received:
    Jul 18, 2007
    Proper ECU? 94 ex motor into 95 lx car

    Hey all...Happy Holidays...back in the summer i posted about my wifes car , a dead 95 LX 2.2..
    With the help of the board i found a 94 2.2v-tec from a 94 ex that was a 5 speed..
    Our car is an automatic...
    so far i am under the impression that:

    1) I can retain the non vtec harness and just wire the v tec to the ecu...

    2.) all i need to change is the ECU ..need one from an automatic EX

    The motor and tranny are already in the car , that all went smoothly,
    my factory 95 non vtec auto ECU part # s POJ L50

    i did pick up a ECU today from an auto EX(94) also grabbed the AT control unit that matches, not sure if i should swap this as well or leave my 95 unit in there..

    there were two models that i saw in the yard today..has me a little boggled

    there was the one i grabbed from a 94auto EX part # POH L50

    I looked at a second auto EX a (95) its computer was ended in L51, funny thing is this car was definately a stock auto, and there was no AT control unit, or a harness...looked very original...also the conectors on the engine harness under the hood were orange....where the main engine harness conects to the firewall harness..

    I hope i grabbed the correct ECU!

    Any help would be greatly appreciated.

    Last edited: Nov 25, 2007
Draft saved Draft deleted

Share This Page