1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.


Discussion in 'ECU's, Electronics, and Tuning' started by 4doorb16, Oct 7, 2003.

  1. 4doorb16

    4doorb16 Junior Member

    Likes Received:
    Sep 23, 2003
    I have a b16 being run by a pm6.I know this ecu won't run it right but it's temporary untill I get a pr3. I'm also using a fuel pressure riser and a Fields vtec controller.I've only taken the car out once and it keeps on sputtering when I accelerate.What's stock fuel pressure for the b16?and any have any idea what I should set the fuel per RPM on the Fields.Any info would be great.
  2. radnulb

    radnulb Senior Member

    Likes Received:
    Sep 23, 2003
    Sinsinnaty, Ohio
    fuel pressure for B16 + D16A6 is identical.

    Chippign the PM6 will fix your fueling issues. If you are feeling adventurous, you can modify your PM6 to run the B16 including activating vtec using the 1wire vtec mods. Alternatively, there are some pretty decent ghettodyne tunes for B16 you can use with the fields controller and have everything work pretty damn well without requiring the complicated 1wire vtec mods.

    edit: see www.pgmfi.org for more info if you choose
Draft saved Draft deleted

Share This Page