1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

here we go again

Discussion in 'HYBRID -> EG-EK / DC' started by civicious, Nov 24, 2003.

  1. civicious

    civicious FüK-VTEC VIP

    Messages:
    9,855
    Likes Received:
    629
    Joined:
    Jun 15, 2003
    Location:
    Houston, TX
    OKAY.....for the past eight years ive been putting an obd0 b16 in an obd2 civic.



    i have an obd2 intake manifold, an obd2 distributor, and an obd2 p72 ecu (i also have an obd2b p2t, but the plugs are different). i found a stock civic ex wiring harness from a guy on here. my transmission is from a 98 integra ls.


    will everything plug up? what am i gonna have to do about the obd0 sensors on the block and such?



    please help....ive been workin on this forever and nothing is working!!
     
  2. JDMilan

    JDMilan Senior Member

    Messages:
    6,730
    Likes Received:
    0
    Joined:
    May 11, 2003
    Location:
    Boca Raton, FL
    I've done it and got tons of cels and that was putting a 1gen b16 into a EG.


    usually the problem lies within the O2 and the distributor
     
Verification:
Draft saved Draft deleted

Share This Page