1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

HI

Discussion in 'HYBRID -> EG-EK / DC' started by sleeperstyle, Jul 9, 2006.

  1. sleeperstyle

    sleeperstyle Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Jul 9, 2006
    b18a help

    i need a bit of help... i know b18A's are kinda the whole for swaps for what u have to do to them mostly.. but yesterday when we got her in my car.. (mind u also reading swap guides and what not since this is my first actual swap) i learned u needed to change the l bracked in the rear of the motor, done.. but now im having trouble with the driver side mount.. is that i need the mount only from a 94 teg+.. or do i need the mount and the bracked that connects to the block from a 94+ teg. your help would be much appreciated
     
    Last edited: Jul 9, 2006
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Into which car?
     
  3. sleeperstyle

    sleeperstyle Junior Member

    Messages:
    7
    Likes Received:
    0
    Joined:
    Jul 9, 2006
    that would be a 92 civic hatch
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    If you look in the reference section, there's a graphic that shows exactly which OEM mounts you need to drop a B block into an EG chassis.
     
Verification:
Draft saved Draft deleted

Share This Page