1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

Honda and Water/Meth injection

Discussion in 'Forced Induction' started by amadeuscr, May 16, 2008.

  1. amadeuscr

    amadeuscr Member

    Messages:
    172
    Likes Received:
    2
    Joined:
    May 13, 2007
    I searched but I haven't get a straight answer , plus I want to know if it will help me to be in a better secure point and let me get more whp , or it's a waste of money ! ,

    thanks in advance
     
  2. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    Secure point? If you're up high enough on power that you need the water/methanol injection to help retard detonation, then yes get it. Most people are NOT running it though.
     
  3. amadeuscr

    amadeuscr Member

    Messages:
    172
    Likes Received:
    2
    Joined:
    May 13, 2007
    when I was tuning on the dyno , I had a bad torque curve , so the only way to correct it was setting advanced ignition to 25 degrees pretty much all the way , thats the number I got from CROME , I had 193lbsft of torque with 282whp ! do you think is too advanced ? cause water injection would let me advance more right ?
     
  4. phunky.buddha

    phunky.buddha Admin with a big stick Admin VIP

    Messages:
    28,465
    Likes Received:
    228
    Joined:
    Sep 30, 2002
    Location:
    Dallas / Fort Worth, TX
    It would, but you would benefit from better tuning too. You should be able to make more power than that with the hardware you already have.
     
Verification:
Draft saved Draft deleted

Share This Page