1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how do i wire the secondary o2 sensor

Discussion in 'HYBRID -> EG-EK / DC' started by lans, Jul 7, 2007.

  1. lans

    lans New Member

    Messages:
    12
    Likes Received:
    0
    Joined:
    Apr 10, 2007
    i converted my car to obd2 how do i hook up the rear 02 sensor i know its a 4 wire but i need wire diagram
     
  2. projecteg

    projecteg built jdm b16

    Messages:
    308
    Likes Received:
    1
    Joined:
    Feb 15, 2006
    Location:
    New York
    [​IMG]

    (viewed from the pin side on the male plug)
    For the 96-98 OBDII ecu:
    1 (green) goes to D13 (green/ blk) for sensor ground
    2 (white) goes to D14 (white/ red) for sensor signal
    3 (blk/white) goes to A5 (blk/ white) for heater signal 4 (blk/yellow) needs to "TAP" into A11 (yellow/ blk) for 12v power

    i think thats it....let me know how that works out..
     
  3. elsombradelsol

    elsombradelsol JDM-ITR-EG2 on BOOOOOST!

    Messages:
    12
    Likes Received:
    0
    Joined:
    Oct 21, 2006
    Location:
    Miami (Kendall) Fl.
    You only really need one anyways.
     
Verification:
Draft saved Draft deleted

Share This Page