1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

How do i?

Discussion in 'General Tech and Maintenance' started by Periculum, Nov 5, 2004.

  1. Periculum

    Periculum Senior Member

    Messages:
    312
    Likes Received:
    0
    Joined:
    Aug 20, 2004
    Location:
    Martinez, GA
    Just wondering how to change the valve cover gasket on a 1.5l in a 91 crx. And what tools do i need to do it? right now mine is almost non existant so i need to do it soon.
     
  2. b204dr

    b204dr Senior Member

    Messages:
    915
    Likes Received:
    0
    Joined:
    Oct 11, 2004
    Location:
    Minnesota
    10mm socket /wratchet , some hondabond or some thing of the like to seal just in case simple as that
     
  3. Periculum

    Periculum Senior Member

    Messages:
    312
    Likes Received:
    0
    Joined:
    Aug 20, 2004
    Location:
    Martinez, GA
    what about removing whats left of the old gasket?
     
  4. b204dr

    b204dr Senior Member

    Messages:
    915
    Likes Received:
    0
    Joined:
    Oct 11, 2004
    Location:
    Minnesota
    its rubber should just pull of unless its fried
     
  5. Periculum

    Periculum Senior Member

    Messages:
    312
    Likes Received:
    0
    Joined:
    Aug 20, 2004
    Location:
    Martinez, GA
    thanks, hopefully it will go well
     
  6. Periculum

    Periculum Senior Member

    Messages:
    312
    Likes Received:
    0
    Joined:
    Aug 20, 2004
    Location:
    Martinez, GA
    for the most part the gasket looked fine, but the spark plug seals showed some breaking from old age. Will the gasket start letting out oil after it flattens out? I didnt really notice anything wrong with the old gasket except that it was a little flatter than the one I was putting in. And the car doesnt seem to miss or skip in acceleration anymore (wierd, didnt think a gasket would do that)
     
Verification:
Draft saved Draft deleted

Share This Page