You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
How do I
- Thread starter Periculum
- Start date
- Replies 2
- Views 607
We may earn a small commission from affiliate links and paid advertisements. Terms
Originally posted by Periculum@Nov 19 2004, 01:26 PM
My friend told me to check my egr valve by pushing on something, but there does not appear to be any 'pushable' parts on the EGR valve. I also havent the first clue how to check ignition timing, but i need to to check my distibutor. Thanks
[post=419335]Quoted post[/post]
Theres a diaphram on the EGR in old V8's and stuff that you push on but itsnot the same for hondas, that method does not aply.
and you check timing with a timing light.
basically, you hook it up to your spark plug wire and it shoots a light when the cyl fires. you aim the light at the crank pulley. there's marks on it for TDC.
using the knowb on the light, adjust it till it hits the tdc mark right on.
what the gun says is your timing. retard or advaced as necessary, lather, repeat if desired.
basically, you hook it up to your spark plug wire and it shoots a light when the cyl fires. you aim the light at the crank pulley. there's marks on it for TDC.
using the knowb on the light, adjust it till it hits the tdc mark right on.
what the gun says is your timing. retard or advaced as necessary, lather, repeat if desired.