1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

how to convert engine to obd2

Discussion in 'ECU's, Electronics, and Tuning' started by kxpro06, Nov 28, 2006.

  1. kxpro06

    kxpro06 97' Del Sol Si Ls/Vtec

    Likes Received:
    Aug 22, 2006
    York, SC
    First off im not sure if this is where i should post this, so im sorry if its in the wrong area.

    I have an Obd1 ls/vtec engine. B18B1,b16 head. Im driving an obd2 97 del sol. how exactly do i convert the motor to obd2 so i dont have to convert my car to obd1? a friend of mine said just change a few sensors,if so what sensors must i change?

    Thanks for any help
  2. D See 2

    D See 2 Senior Member

    Likes Received:
    Sep 29, 2002
    Baltimore, MD
    Use your OBD2 harness...

    - The distributor will work, but the plugs are different, so you'll have to either cut-n-splice or find an adapter harness.

    - You'll have to swap the injectors.

    - You'll have to use the purge control solenoid valve that's on your stock motor. (for Emissions only)

    - You'll have to buy an OBD2 b-series VTEC oil pump, lower timing cover, OBD2 crank fluctuation sensor, OBD2 b-series timing gear, and an extra key. (One get used for the gear, and the other for the crank pulley itself.
Draft saved Draft deleted

Share This Page