HUGE, bseries, dseries, turbo parts, oem rsx parts, integra parts, crx

We may earn a small commission from affiliate links and paid advertisements. Terms

bambam

Member
the pictures don't do these wheels any justice. Any imperfections you might see are only of the clear coat peeling off, especially in the centers. But, you're never going to find a set of swirlies that don't at least have the clear peeling of. Honestly, you can't see the peeling clear in person, it just show's up like that from the flash. They are a MUST SEE! Pics of the wheels:

ABSOLUTELY NO CURBAGE!!!!!!!!! AND NO SCRATCHES!!!!!!!!!!

MAKE AN OFFER!!!!!!!

Picture_018_000.jpg

Picture_019_000.jpg

Picture_020_001.jpg

Picture_021_003.jpg

Picture_024_001.jpg

Picture_025_000.jpg


Random parts:
Safc, used w/ harness and directions/cd-SOLD!!!
JDM CTR navigation console, fits into EK's, great condition
OEM CTR floor mats
OEM CTR Tailllights
DC5 Type R (rsx) oem floor mats
DC5 Type R (rsx) oem door panels
GSR Swirlies/blades wheels (best condition i've ever seen on a set of these)
OEM 88-91 civic/crx metal hood
88-89 crx taillights
88 crx stock rear bumper, red
88 crx dx Master cylinder, good
88-91 crx rear quarter glass
integra headlights

I also have 3 junked integras. Anything from them is for sale minus the motors/trannies, and rear disk conversions. All interior and engine bay stuff must go, doors, glass, hoods, etc.

Aftermarket Dohc parts:
Venom spark plug cover, RED, for DOHC VTEC heads, brand new
Skunk2 chipped OBD0 PR3, brand new

Stock Dohc parts:
Complete B18a head
1 B18a intake manifold
3x B18b intake manifold
Complete blown JDM B16a block, has nickel sized hole in it, missing one piston/rod
JDM LS/B20 cams w/ cam gears
3x LS throttle bodies
90 LS Exhaust manifold (bolts up to stock cat w/ bseries swap in 88-91 civic/crx)
OBD0 PR4 LS ecu
GSR Interior dash harness w/ ecu plugs

Aftermarket Sohc parts:
Unorthodox racing adjustable cam gear, brand new
Unorthodox racing lightweight crank pulley, brand new

Stock Sohc parts:
D16Y8 head, MINT, complete
D16z6 head, MINT w/ 2 bent valves
D16z6 block complete w/ broken rod
D16z6 P28 pistons
D16y8 p2p pistons
D16z6 tranny
D15b7 tranny
D15B2 clutch, pressure plate, low miles
D16Y8 clutch, pressure plate, flywheel, low miles
2x alternators
2x starters
88-91 Si mpfi intake manifold w/ throttle body
any year dseries injectors/fuel rails

Turbo parts:
HUGE Rev hard intercooler
Denso 360cc injectors for D/B series
Fast-turbo.com oil line kit, brand new
Bseries log manifold w/ 35/38mm wastegate flange, brand new
AC Autotechnic Boost gauge, brand new
ATP oil line restrictor, brand new
T3/T4 adaptor exhaust manifold adaptor plate, brand new
T3/T4, T3 downpipe flange, brand new
2.5 inch downpipe piping, brand new
2 inch intercooler piping, brand new
3 ft. of silicone intercooler couplers, brand new
Tbolt clamps, brand new
Brass Vacuum T's, brand new

I have 15+ vouches on HT, including the car i bought on there, check my Bio for them. I've sold turbos, transmissions, heads, etc.


Please PM me or email me w/ offers. I'll let everything go for a cheap but reasonable price. If you need something from one of the integras or crxs i have let me know, they are sitting out back. Everything listed here is used unless it says "brand new" next to it.

email: jkbboy85@hotmail.com
aim: jkbboy85
 
Quoted post[/post]]
pictures of intercooler and oil lines to ripperbone@yahoo.com, and how much $ for both

price is $350 shipped for it all. intercooler is $700 from revhard but has some bent fins, nothing major that affects performance. oil line kit is best on the market and sells for $110. I'll sell that for $90 shipped and the intercooler for $300 shipped or $350 for both.

Quoted post[/post]]
i need the timing belt covers off that b16a block, how much, paypal ready
no head on it, and i don't have the lower...sry buddy.
 
Sounds good.. Do you have paypal or send money order? Thanks
 
Where are you located??

how much for a y8 head?

Also looking for a junked 2 door teggy from 94 or 95 with motor/trans/wiring/ecu/full interior.
 
how much for the Oil restrictor and the 3ft of silocone charge pipe connectors. possible to ship to Toronto Canada?? i can pay you paypal
 
price on b series log mani shipped and t3/t4 adapter to 01880 and also pics if you have them
 
Quoted post[/post]]
Sounds good.. Do you have paypal or send money order? Thanks

yep, paypal. jkbboy85@hotmail.com is my paypal account.

Quoted post[/post]]
Where are you located??

how much for a y8 head?

Also looking for a junked 2 door teggy from 94 or 95 with motor/trans/wiring/ecu/full interior.

located in CT. 175 shipped for the complete MINT head.
i don't have any motor/trans/wiring/ecu
but i do have interior parts but not full.


Quoted post[/post]]
price on b series log mani shipped and t3/t4 adapter to 01880 and also pics if you have them
manifold is sold.
t3/t4 adapter is $12 shipped.


Quoted post[/post]]
Is the Z6 tranny in good condition? Low miles? Grinding? how much shipped if you will to 46615?

z6 tranny has 112k on it. Doesn't grind at all. $275 shipped. last time i shipped a z6 tranny, it was 80 dollars (i also ALWAYS have the shipper package it, so there isn't any complaints on packaging).

Quoted post[/post]]
how much for the Oil restrictor and the 3ft of silocone charge pipe connectors. possible to ship to Toronto Canada?? i can pay you paypal
I can ship to toronto but shipping is a little more. $30 shipped.
 
that sounds good, but just for some clarity. making sure we are on teh same page, its silicone charge pipe connectors?? what size are they? 2" 2.5" 2.75" 3 " ????
 
Holy cow on the transmission! Does that inclue shipping? Your only in CT im in northern IN. I just got another offer for $200 + shipping. with 120k and no grinds. Does yours come with shift linkage? or just the tranny itself.
 
2 inch intercooler piping, brand new
3 ft. of silicone intercooler couplers, brand new
Tbolt clamps, brand new

how much for all this and what size and color is the silicone couplers?
 
Back
Top