1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

hybrid transmission?

Discussion in 'HYBRID -> ED-EF / DA' started by Panther550, Feb 18, 2005.

  1. Panther550

    Panther550 Member

    Messages:
    75
    Likes Received:
    0
    Joined:
    Feb 12, 2005
    Location:
    Edmonton, Alberta
    I read in an article on this site that you can't mate a D16a1 transmission to usdm d-series blocks, but does anyone know if you can take the gears from a d16a1 and just put them in a usdm d-series transmission housing.

    And if it is possible would I still be able to use final drive gear from the '88 CRX Si.
     
  2. jlicrx

    jlicrx Senior Member

    Messages:
    1,891
    Likes Received:
    65
    Joined:
    Jun 5, 2003
    Location:
    Colorado Springs

    Integra transmission, for the D16A1, gears will not work in the 88-91 D-series L3 transmission
     
  3. Panther550

    Panther550 Member

    Messages:
    75
    Likes Received:
    0
    Joined:
    Feb 12, 2005
    Location:
    Edmonton, Alberta
    Thanks for the info, i guess i'll have to look at doing something else.
     
Verification:
Draft saved Draft deleted

Share This Page