1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I need a str8 Answer on LS\Vtec!!

Discussion in 'Engine Building' started by teggyboy87, Dec 8, 2008.

Thread Status:
Not open for further replies.
  1. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    Hey Guys so before you start off by thinking I'm a Noob, think again!!! Just need a few str8 Answers on the LS\Vtec Swap....I'm looking at getting a 98-99 Integra LS with in the next few months and want to perform the LS\Vtec on it. I have been having a hell of a time trying to find the exact parts that I need and verifiying that these are the correct ones. So far I know I need of course the Head, Head Studs, The V/Tec Oil Conversion Kit, The Water Pump and the Oil Pump....I remeber something about maybe a new distribuator from a while ago and a Timing Belt....is there any thing else I am missing? Oh and it would be helpful if anyone could maybe tell me how to wire the vtec into the ECU. and do I need the GSR ECU for it to work?:ph34r:

    ----If you're not first you're last!!----Ricky Bobby--------------------------------
     
  2. 95b16coupe

    95b16coupe New Member

    Messages:
    6,538
    Likes Received:
    224
    Joined:
    Nov 6, 2008
    Location:
    ct
    Last edited: Dec 8, 2008
  3. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    well you dont have to be a jackass about it....jerk!!! I am very aware of that link already! I want to hear what others have to say about it.....Jackass!
     
  4. 95b16coupe

    95b16coupe New Member

    Messages:
    6,538
    Likes Received:
    224
    Joined:
    Nov 6, 2008
    Location:
    ct
    hey, i might be a jackass, but i helped.

    and why do you want an ls/vtec anyways?
     
  5. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    lol...you really didnt help at all! I had found that link way earlier today! and besides I already know how to install it I just need one compiled list of what all the componets are....I dont want anyones skewed opions I want the facts, what is necessary for the build to work not this will work but uhhh you have to have this part or else its gonna fail....I just want to know what is necessary and If I am missing any componets from my list above!!! If you can answer that I'll retract my statement that you are a jackass!!!!!!

    Oh I want LS/Vtec becuz it fits my life style! I want something powerful not over the top...it seems like just the right amount of power for me after my complete build is done, and besides to have something unique espicially in the area I live in becuz everyone has the same thing here......a Mexicanized honda or acura! It'll be a huge change for people to see what these cars are truly made of.
     
    Last edited: Dec 8, 2008
  6. 95b16coupe

    95b16coupe New Member

    Messages:
    6,538
    Likes Received:
    224
    Joined:
    Nov 6, 2008
    Location:
    ct
    ok, so i didn't help.

    i'm trying to help now. why do you want lsvtec?
     
  7. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    I want LS/Vtec becuz it fits my life style! I want something powerful not over the top...it seems like just the right amount of power for me after my complete build is done, and besides to have something unique espicially in the area I live in becuz everyone has the same thing here......a Mexicanized honda or acura! It'll be a huge change for people to see what these cars are truly made of.
     
  8. 95b16coupe

    95b16coupe New Member

    Messages:
    6,538
    Likes Received:
    224
    Joined:
    Nov 6, 2008
    Location:
    ct
    how much money do you have to spend? how much hp are you going for?
     
  9. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    haha! lets see...money is not really going to be a a real problem, i'm planning on doing things in stages.....i'm look for around maybe 220-240whp.
     
  10. newb

    newb phresh VIP

    Messages:
    3,967
    Likes Received:
    179
    Joined:
    Sep 17, 2007
    Location:
    Backwoods Northwest
    First off you are a fawkin noob if you have to ask the questions you did. Second, everyone here is just gunna repeat whats in that link. Thats why its a sticky. In fact, everything you wanna know is covered in stickies in the Reference and General Tech sections. And thats the str8 answer dogg!
     
    Last edited: Dec 8, 2008
  11. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    first off....I was not saying that link was skewed....no where have i refrenced that particular link was skewed...I've been getting very different answers from many places inlcuding cats that have put these togather I dont wat a Fawking brand by brand you dicks I never mentioned that either...I just want the general parts just to get it set up as i mentioted earlier, the rest will fall in line beucz I know wat the Fawk I want and how these componets corrospond with each other...so dont you dare fawking jump all over my dick! becuz I want some str8 info....what kind of fawking forum is this where you mutha Fu***s just gang up on some one for asking a question...I have been on plenty other Honda/Acura/Mitsubishi/Toyota Frourms where people were just helpful...you assholes are another story.....I have never seen any one that was so rude to someone for asking a quetion before and beleive I worked retail for three years! You guys are flopping idiots as long as I am concerned.....and before you can jump at someones thorat why dont you fuckin read what the hell was posted prior....
     
  12. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    and besides about opinios or "skewed" heres what he wrote on his forum......"Let's start. Now, in my opinion, there are a few NECESSARY things to do/parts to buy when building a "reliable" lsvtec build:
    " Like I said I already know how the parts corospond with each other I just want to know what are the necessiary parts to make the damn head work on the block........ that quote is pulled right off the post....see it for yourself. Build a Reliable LS/VTEC
     
  13. newb

    newb phresh VIP

    Messages:
    3,967
    Likes Received:
    179
    Joined:
    Sep 17, 2007
    Location:
    Backwoods Northwest
    Ive actually read that whole thread, many times. Dont think your proving somethin by linkin me to it. No one jumped on you cause you asked a question. Your gettin flamed cause you started talkin shit to the first person to show you a very powerful internet research tool. So, get use to it.
     
  14. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    dont even go there....did I not state in the second response that I already read that website? and you all dont have to go as far as showing me how to use the freakin browser...I'm a fuckin computer technician. and besides if I didnt know what I was talking about or what then what the hell am I doing listing the parts at the very first post? does that not show you that I have the understanding to pull it off but just checking myself to make sure that the information is correct based upon what the first post says.....is that not a purpose of a froum? or am I wrong for asking a question that I thought people were actually kind enough to respond with good answer, not fucking showing me how to use a browser or do research. If it didnt know what I was talking about how the hell would I have been able to list all of those items by guessing, I dont think so! so dont you dare go there...
     
  15. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    "First off you are a fawkin noob if you have to ask the questions you did" is this not what you stated in your first post? so ur saying you didnt jump on me....my ass!
     
  16. newb

    newb phresh VIP

    Messages:
    3,967
    Likes Received:
    179
    Joined:
    Sep 17, 2007
    Location:
    Backwoods Northwest
    Like talkin to a damn wall.

    Ill go where ever I damn well please, thank you very much.

    Are you happy you can copy and paste every basic LS/VTEC build sheet on the intardnet?

    Again, I go where I want.

    Let me try to dumb it down some more. I didnt say that cause you asked a question, thats what forums are for like you said. I said that because you started talkin shit to the first person to respond, like I already said.
     
  17. teggyboy87

    teggyboy87 New Member

    Messages:
    13
    Likes Received:
    0
    Joined:
    Dec 8, 2008
    Location:
    Alexandria, VA
    and you wanna know y i gave him shit...becuz i don't take well to sarcasm from people i don't know! I asked a serious question and he responded rudely. but we quickly overcame our differeces and then he started to ask me serious questions.....so dont be a retard y dont you fuckn read is that so fuckn hard?
     
  18. eg6sir

    eg6sir Supa Mod Moderator VIP

    Messages:
    21,703
    Likes Received:
    321
    Joined:
    Aug 17, 2005
    Location:
    661 BK CA
  19. eg6sir

    eg6sir Supa Mod Moderator VIP

    Messages:
    21,703
    Likes Received:
    321
    Joined:
    Aug 17, 2005
    Location:
    661 BK CA
    yes, you're missing many things...

    read link above.. found by a simple .. "reliable ls vtec" search..
     
  20. newb

    newb phresh VIP

    Messages:
    3,967
    Likes Received:
    179
    Joined:
    Sep 17, 2007
    Location:
    Backwoods Northwest
    With every post, your proving to me that it is. Douche.
     
Thread Status:
Not open for further replies.

Share This Page