1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I Need Help, Asap!!!!!

Discussion in 'HYBRID -> EG-EK / DC' started by F23AccordLX, Jun 30, 2006.

  1. F23AccordLX

    F23AccordLX Junior Member

    Messages:
    3
    Likes Received:
    0
    Joined:
    Mar 23, 2006
    I am swapping a D16Z6 block and head into my 97' Civic EX because i had some bottom end problems w/ the Y8. I am using my intake manifold, tranny, alternator, harness, everything but the distributor, now thats what i need to know, will and OBD1 D16Z6 dizzy plug DIRECTLY into the OBD2 Harness? please let me know, pics would be great to... (I AM ALREADY RUNNING A P28 AND A BOOMSLANG CONVERSION HARNESS SO I SHOULD BE GOOD W/ WIRING)
     
  2. GSRCIVICTN

    GSRCIVICTN Lost in a sea of rednecks

    Messages:
    431
    Likes Received:
    3
    Joined:
    Feb 10, 2006
    Location:
    Nashville, TN
    Look at your harness. Look at your distributor.
    Do the plugs match? If so, yes.
    Do the plugs not match? If so, use a different connector to match the harness and cut all wires and solder. All wires will be there but they may be on one or two connectors. Look and see if that is the case.
     
Verification:
Draft saved Draft deleted

Share This Page