1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I need help! Swap b16

Discussion in 'Civic and del Sol - EG and EK' started by Ludwing6, Dec 3, 2015.

  1. Ludwing6

    Ludwing6 New Member

    Messages:
    1
    Likes Received:
    0
    Joined:
    Nov 30, 2015
    image.jpeg image.jpeg i have a project civic 95 hb engine d15b8 a can swap b16a2 Si 2000
    I need help conect ecu p2t in harness civic 95.
    Note: i dont speak english sorry.

    Buen dia, tengo un civic 95hb motor d15b8, compre un honda Si 2000 chocado y tengo todo para hacer el swap b16a2, solo que no encuentro como hacer con el arnés.
    He buscado informacion y este es el foro mas completo.
    Gracias.
     
  2. CAFROG

    CAFROG Honda Minion VIP

    Messages:
    4,411
    Likes Received:
    148
    Joined:
    Apr 5, 2009
    Location:
    NOR-CAL
    Yo sabe pequito Español per neccisto usar ingles. Por Favor, Tranduce

    Use the engine harness out of the D15. You may need to lengthen some of the plugs to reach the sensors on the new motor but most will fit fine. You will need to add the VTEC and knock sensor wires from the Si engine harness.

    Do not use that ECU. You need a OBD1 ECU for your B16. P30 or a OBD1 ECU that has been chipped to run your B16.

    Most of your motor mounts will fit. But the mount for the transmission near the firewall will not work. A mount from 94 - 01 Integra will work.

    Use the axles for a 94 - 01 Integra. But the ones you have may fit.

    I do not think the shift linkage will fit. I could be wrong but I think you need 94-01 Acura Integra shift linkage or JDM linkage for a EG B16.
     
Verification:
Draft saved Draft deleted

Share This Page