1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn More.

I need help with rear bumper!

Discussion in 'Body / Exterior / Interior / Cosmetics' started by Jdmer2, Jul 5, 2009.

  1. Jdmer2

    Jdmer2 New Member

    Messages:
    2
    Likes Received:
    0
    Joined:
    Jul 5, 2009
    I bought a 90 da9 and It has a Wack ass body kit and the rear bumper is bondoed or however u say it as 1 peace they put a thick layer of bondo and I do t like that body kit is there a way I can remove the bondo to take off the bumper or should I just chizle it off some one help please I'm getting frustrated
     
  2. MsMe EG

    MsMe EG New Member

    Messages:
    58
    Likes Received:
    0
    Joined:
    Aug 7, 2009
    Location:
    here and there
    propane torch the heat will soften it up enuff to get it off then use sand paper to clean it up dont use to must heat the u"ll fuck up the fiberglass... if u dnt wanna do that it takes alot longer but sandblasting and sandpaper will work too
     
  3. dateg513

    dateg513 New Member

    Messages:
    87
    Likes Received:
    2
    Joined:
    Sep 3, 2009
    Location:
    cincinnati
    ya or if ya good with a da grinder but be carefull so u dont fuck up fiberglass as dude said of cut thru the metal 80 grit sand paper will take it do metal on fenders
     
  4. dateg513

    dateg513 New Member

    Messages:
    87
    Likes Received:
    2
    Joined:
    Sep 3, 2009
    Location:
    cincinnati
    sorry as the lady said i didnt read who ya was no dis respect
     
Verification:
Draft saved Draft deleted

Share This Page